Indicator lights, Warning – Speed Queen W446I User Manual

Page 29

Operation

38970

Indicator Lights

IN USE

This light will remain on while washer is in use.

RINSE

This light will be on during the rinse portion of the
cycle.

SPIN

This light will be on during the final spin only. Washer
will stop automatically at end of cycle. (SPIN light and
IN USE light will go out indicating end of cycle.)
Leave loading door open after removing laundry.

IMPORTANT: If washer fails to operate properly
after installation, make sure electrical service and
water supply faucets are turned on. Are all the
controls properly set? Have a qualified service
person refer to the wiring diagram (located inside
of washer control hood), check for broken, loose or
incorrect wiring.

Should washer stop, but IN USE, RINSE or SPIN light
remain on, the motor overload protector may have
cycled. Refer to page 38.

The washer will stop (pause) shortly before the first
spin and final spin.

To reduce the risk of bodily injury, do not
remove laundry from washer until all
lights are out, and all moving parts have
stopped.

W092

WARNING