SUPER MICRO Computer 6014P-TR - Manual (Page 121)

C-1
Appendix C: System Specifi cations
Appendix C
System Specifi cations
Processors
Single or dual 604-pin Intel ® Xeon TM EM64T processors at a front side
(system) bus speed of 800 MHz.
Note: Please refer to our web site for a complete listing of supported processors: www.
supermicro.com
Chipset
Intel E7520 chipset
BIOS
8 Mb Phoenix ® Flash ROM
Memory Capacity
Six 184-pin DIMM sockets supporting up to 12/24 GB of registered ECC
DDR333/266 SDRAM
Note: Interleaved memory - requires memory to be installed two at a time. See the memory
section in Chapter 5 for details.
Serial ATA Controller
• Marvell controller for 4-port Serial ATA (RAID 0,1 and JBOD supported)
• Intel ICH5R on-chip controller for 2-port Serial ATA (RAID 0,1 and JBOD
supported)
Serial ATA Drive Bays
Four (4) hot-swap drive bays to house four (4) standard Serial ATA drives
Peripheral Drives/Bays
One (1) slim fl oppy drive
One (1) slim DVD/CD-ROM drive