SUPER MICRO Computer 6014P-TR - Manual (Page 111)

Appendix B: Software Installation
B-11
Adding/Deleting Hotspares
Note: In order to rebuild a RAID (RAID 0 or RAID 1), you need to add a new
HDD as a hotspare.
1. Turn on your computer and press Ctrl+A as prompted to access the ARC
Utility.
2. From the ARC menu, select Array Confi guration Utility (ACU).
3. From the ACU menu, select Add/Delete Hotspares.
4. Use the up and down arrow keys to highlight and select the disk you want to
designate as a hotspare, and press Insert, then press Enter.
5. Select Yes when the following prompt is displayed:
"Do you want to create spare?" (Yes/No?)
The spare you have selected will appear in the Select Drive Menu.