beautypg.com

B-8 s – SUPER MICRO Computer 6014P-TR User Manual

Page 108

background image

B-8

S

UPER

S

ERVER 6014P-T/6014P-TR User's Manual

5. When fi nished, press Done (as shown on the following screen).

Note: If you select Migrate for RAID 0, or Build for RAID 1, you will be asked to

select the source drive. The contents of the source drive will be preserved. However,

the data on the new drive will be lost.

4. The item "Create RAID via" allows you to select between the different meth-

ods of creating RAID 0 and RAID 1.

The following table gives examples of when each is appropriate.

RAID Level Create Via When Appropriate

RAID0

No Init.

Creating a RAID0 on new drives

RAID0

Migrate*

Creating a RAID0 from one new drive with data you wish to preserve.

RAID1

Build1

Any time you wish to create a RAID1, but especially if you have data on one drive
that you wish to preserve.

RAID1

Clear

Creating a RAID1 on new drives, or when you want to ensure that the array contains
no data after creation.

RAID1

Quick

Fastest way to create RAID1. Appropriate when using new drives.

RAID1

Init.

Fastest way to create RAID1. Appropriate when using new drives.

This manual is related to the following products: