Star Trac Pro S - Manual (Page 16)

5. Installing the Handrails
Locate the left handrail (the handrail with the S TOP switch).
Connect the S TOP switch cable from the handrail to the display
cable extending from the display handrail stub.
Insert the handrail connecting tube into the display handrail stub,
taking care not to pinch the S
TOP switch cable between the
handrail pieces. Make sure the handrail bottoms fully against the
display handrail stub.
Rotate the handrail, if necessary, to align the drilled hole in the
display handrail stub with the threaded hole in the handrail con-
necting tube. Secure the handrail to the display handrail stub
using two
1/4”-28 x 3/8” screws.
Install the right handrail in a similar manner, as described in
steps
5b and 5c , omitting instructions related to the S TOP switch
cable.
14 STAR TRAC PRO S / PRO / PRO ELITE TREADMILL O
WNER
’
S
M
ANUAL
Step 5a
Step 5b
Step 5c
Step 5d