Activating display of voip status codes – Siemens Gigaset C450 IP User Manual
Page 59
58
Web configurator
Gigaset C450 IP / Greek eng / A31008-M1713-T151-2-8U19 / web_server.fm / 19.9.06
Ve
rs
ion 4,
16
.09.
2005
Conducting the firmware update locally.
Precondition: A Web server runs on the
local PC (e.g. Apache).
¤
First, load the desired version of the
firmware from the Internet onto a local
PC.
¤
In the
User defined firmware file
field
enter the IP address of the PC in your
local network and the complete path
and name of the firmware file on the
PC. Example: 192.168.2.105/C450IP/
Firmware_Datei.bin.
¤
Click on
Set
to save the changes.
This setting is automatically used for the
subsequent firmware update. The Inter-
net server URL stays saved and is re-used
for further firmware updates. If you want
to use a local PC again for another update,
then you have to re-enter the IP address
and file name.
Starting firmware update
Preconditions:
u
No calls are being made via the fixed
network or VoIP.
u
There is no connection between regis-
tered handsets.
u
The base station menu is not open in
any of the handsets.
¤
Click on
Update Firmware
.
The firmware is updated. This process can
take up to 3 minutes.
Activating display of VoIP status
codes
Display VoIP status messages on your
handset when there are VoIP connection
problems. These messages give you infor-
mation on the status of a connection and
contain a provider-specific code that helps
the service team when they are analysing
the problem.
¤
Open the following Web page:
Settings
¢
Miscellaneous
.
¤
Click on the
Yes
option after
Show VoIP
status on handset
to activate status mes-
sage display
If you click on
No
, no VoIP status mes-
sages are displayed.
¤
Click on
Set
to save the changes.
Notes:
– Updating via a PC in your LAN can make
sense if you want to download the same
version of the firmware again because of an
error or if you want to first test the firmware
for security reasons.
– If an error arises during a firmware update
from a local PC, the most recent version of
the firmware is automatically downloaded
from the Internet.
Notes:
You can also start the firmware update on the
handset (page 41).
Note:
A table with possible status codes and their
meaning can be found in the Appendix on