Siemens Gigaset C450 IP - Manual (Page 46)

45
Operating the base station on the PABX
Gigaset C450 IP / Greek eng / A31008-M1713-T151-2-8U19 / settings_bs_hs_pabx.fm / 19.9.06
Ve
rs
ion 4,
16
.09.
2005
Setting pauses
Changing pause after line seizure
You can set the length of the pause
inserted between pressing the talk key c
and sending the phone number.
§Menu§
4 I O 1 L
~ Enter digit for the pause
length (1 = 1 sec.; 2 = 3 sec.; 3
= 7 sec.) and press §OK§ .
a Press and hold (idle status).
Changing the pause after the recall key
You can change the length of the pause if
your PABX requires this (refer to the user
guide for your PABX).
§Menu§
4 I O 1 1
~ Enter a digit for the length of
the pause (1 = 1 sec.; 2 = 2
secs.; 3 = 3 secs.; 4 = 6 secs.)
and press §OK§ .
a Press and hold (idle status).
Switching temporarily to tone
dialling (DTMF)
If your PABX still operates with dial pulsing
(DP), but you need touch tone dialling
(DTMF) for a connection (e.g. to listen to
the network mailbox) you must switch to
touch tone dialling for the call.
Precondition: You are currently conduct-
ing an external call via the fixed network
or you have dialled an external fixed net-
work number or an external call is sig-
nalled.
§Menu§ Open menu.
Tone dialling
Select and press §OK§ .
Touch tone dialling is now activated for
this call only.