Siemens Gigaset C450 IP - Manual (Page 44)

43
Making VoIP settings
Gigaset C450 IP / Greek eng / A31008-M1713-T151-2-8U19 / settings_bs_hs_pabx.fm / 19.9.06
Ve
rs
ion 4,
16
.09.
2005
For Authentication Name and Authentication
Password enter the provider-dependent
access data that has to be transferred by
the phone to the SIP service at registra-
tion.
Tip: A previously set password is not dis-
played.
Setting the phone's IP address
in LAN
The base station requires an IP address in
order to be "recognised" by the LAN.
The IP address can be assigned to the base
station (by the router) automatically or
manually.
u If performed dynamically, the router's
DHCP server automatically assigns the
base station an IP address. The base
station's IP address can be changed
according to router settings.
u If performed manually, you assign the
base station a static IP address. This
may be necessary regardless of your
network configuration.
Activating/deactivating dynamic
assignment
§Menu§
¢
Settings
¢
Base
¢
VoIP
Configuration (enter system PIN)
¢
IP
Configuration
dynamic IP address ( ‰ = on)
Select and press §OK§ to change
the current settings.
If you deactivate dynamic assignment,
you must set the base station IP address
and subnet mask manually. A correspond-
ing message is displayed.
Viewing/changing the base station IP
address
You can only change the IP address
(page 82) if you have deactivated dynamic
assignment.
192.168.2.2 has been preset by default.
§Menu§
¢
Settings
¢
Base
¢
VoIP Configuration (enter system PIN)
¢
IP Configuration
¢
IP Address
The current IP address is displayed.
~
If necessary, enter IP address
and press §OK§ .
Viewing/changing subnet mask
You can only change the subnet mask
(page 86) if you have deactivated dynamic
assignment.
255.255.255.0 has been preset by
default.
§Menu§
¢
Settings
¢
Base
¢
VoIP
Configuration (enter system PIN)
¢
IP
Configuration
¢
Subnet Mask
The current subnet mask is displayed.
~
If necessary, enter subnet
mask and press §OK§ .
Note:
For how to make the local network settings on
the Web configurator, turn to page 50.
Note:
To assign the IP address dynamically, the DHCP
server on the router must be activated. Please
also read the user guide for your router.
Note:
For notes on the IP address, please see page 50
and the glossary on page 82.
Note:
For notes on the subnet mask, please see
page 50 and the glossary on page 86.