Siemens Gigaset C450 IP - Manual (Page 38)

37
Handset settings
Gigaset C450 IP / Greek eng / A31008-M1713-T151-2-8U19 / settings_bs_hs_pabx.fm / 19.9.06
Ve
rs
ion 4,
16
.09.
2005
Handset settings
Your handset is preconfigured, but you
can change these settings to suit your
individual requirements.
Change display language
You can view the display texts in different
languages.
§Menu§
¢
Settings
¢
Handset
¢
Language
The current language is indicated by ‰ .
q Select a language and press
§OK§ .
a Press and hold (idle status).
If you accidentally choose a language you
do not understand:
§Menu§
4 2 2
Press keys one after the other.
q Select the correct language
and press §OK§ .
Setting the display
You have a choice of four colour schemes
and several different contrasts. You can
also set a screensaver and backlight.
§Menu§
¢
Settings
¢
Handset
¢
Display
You have the following options:
Screensaver
There are four different screensavers
and the settings No Screensaver or Dig-
ital Clock .
Colour Scheme
Four colour schemes. When the back-
light is switched off, the display is
shown in black and white regardless of
the selected setting.
Contrast
You have a choice of several different
contrasts.
Backlight
In Charger / Without Charger . Determines
whether the backlight stays on perma-
nently or is switched off after a certain
time ( ‰ = permanently switched on).
Activating/deactivating auto-
answer
When this function is activated, when a
call arrives you can simply lift the handset
out of the charging cradle without having
to press the talk key c.
§Menu§
¢
Settings
¢
Handset
Auto Answer
Select and press §OK§ ( ‰ = on).
a Press and hold (idle status).
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree talking to five different levels
and the earpiece volume to three different
levels. You can only adjust the loud-
speaker volume during a call.
You are conducting an external call.
t
Press the control key.
q Adjust the volume and press
§OK§ .
If t is assigned a different function e.g.
toggling (page 22):
§Menu§ Open menu.
Volume Select and press §OK§ .
Make settings (see above).
Note:
If the backlight is switched on outside the
charging cradle, the standby time for the
handset is considerably reduced!
Note:
The handsfree volume can only be adjusted
when this function is set.