Siemens Gigaset C450 IP - Manual (Page 41)

40
Base station settings
Gigaset C450 IP / Greek eng / A31008-M1713-T151-2-8U19 / settings_bs_hs_pabx.fm / 19.9.06
Ve
rs
ion 4,
16
.09.
2005
Restoring the handset default
settings
You can reset any individual settings and
changes that you have made. This will not
affect entries in the directory, calls list, or
SMS lists or the handset's registration to
the base station.
§Menu§
¢
Settings
¢
Handset
¢
Reset Handset
§OK§ Press the display key to con-
firm.
a Press and hold (idle status).
Cancel the reset with a.
Base station settings
The base station settings are carried out
using a registered Gigaset C45 handset.
Changing the system PIN
You have to enter the system PIN when
registering a handset to the base station.
You can change the base station's 4-digit
default system PIN ("0000") to a 4-digit
PIN known only to yourself.
§Menu§
¢
Settings
¢
Base
¢
System PIN
~ Enter current system PIN and
press §OK§ .
~ Enter your new system PIN
and press §OK§ .
~ Now re-enter the new system
PIN and press §OK§ .
For security reasons, "****" is displayed
instead of the numbers entered.
a Press
and hold (idle status).
Restoring the base station to
factory settings
Resetting the base station via the
menu
The individual settings are reset. Only the
date and time and the system PIN are reta-
ined. The handsets are still registered.
§Menu§
¢
Settings
¢
Base
¢
Base Reset
§OK§ Press the display key to
confirm.
Resetting the base station using a key
on the base station
All individual settings and the system PIN
are reset. The system PIN is "0000" again.
All handsets registered above and
beyond the delivery scope are deregis-
tered.
¤
Remove the cable connections from
the base station to the router and fixed
network.
¤
Remove the base station mains unit
from the socket.
¤
Press and hold the registration/paging
key (page 1).
¤
Plug the mains unit back into the power
socket.
¤
Press and hold the registration/paging
key (at least 2 sec.).
¤
Release the registration/paging key.
The base station has now been reset.