Siemens Gigaset C450 IP - Manual (Page 12)

11
First steps
Gigaset C450 IP / Greek eng / A31008-M1713-T151-2-8U19 / starting.fm / 19.9.06
Ve
rs
ion 4,
16
.09.
2005
Downloading VoIP provider data
The phone establishes a connection with
the Siemens server on the Internet. Pro-
files with general access data for various
VoIP providers can be downloaded here.
The message Select country is displayed.
After changing the display:
q
Select country and press §OK§ .
Select provider is displayed.
After changing the display:
q
Select VoIP provider and press
§OK§ .
The necessary data for your VoIP provider
is downloaded and saved on the phone.
Entering VoIP user data
Depending on the VoIP provider, the
following information will be requested
in sequence:
Username:
If this is required by your pro-
vider, enter name and press
§OK§ .
Authentication Name:
Enter name and press §OK§ .
Authentication Password:
Enter password and press §OK§ .
Completing the VoIP settings
Once all the necessary entries have been
made, the handset reverts to idle status.
If all the settings are correct and if the
phone can establish a connection to the
VoIP server, then the internal name of the
handset will be displayed:
You can now use your phone to make calls
via the fixed network and the Internet!
Callers can reach you on your fixed
network number and your VoIP number! Note:
If the data for your VoIP provider is not offered
for download, you must make the necessary
settings with the Web configurator at a later
stage (page 51)
Press the display key
§Back§ . You can then con-
duct the following steps with the connection
assistant (see "Entering VoIP user data").
Note:
Please note when making these entries that
the VoIP user data is case sensitive. If neces-
sary, press and hold the
#
key to switch
between upper and lower case and digits
Note:
To ensure that you can always be reached via
the Internet, the router should be permanently
connected to the Internet.
¨ V
INT 1
11.07.06 11:56
§§§§§§INT§§§§§ §§§§Menu§