SMC Networks 16 10BASE-T - Manual (Page 97)

Filtering Addresses for Management Access
3-61
3
Web – Click Security, IP Filter. Enter the IP addresses or range of addresses, and
click Add IP Filtering Entry to update the filter list.
Figure 3-38. Creating a Web IP Filter List
CLI – This example allows SNMP access for a specific client.
Console(config)#management snmp-client 10.1.2.3 4-28
Console(config)#end
Console#show management all-client
Management IP Filter
HTTP-Client:
Start IP address End IP address
-----------------------------------------------
1. 10.1.2.1 10.1.2.254
SNMP-Client:
Start IP address End IP address
-----------------------------------------------
1. 10.1.2.3 10.1.2.3
TELNET-Client:
Start IP address End IP address
-----------------------------------------------
Console#