SMC Networks 16 10BASE-T - Manual (Page 319)

Spanning Tree Commands
4-143
4
Example
show spanning-tree
This command shows the configuration for the spanning tree.
Syntax
show spanning-tree [interface]
• interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-4)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• Use the show spanning-tree command with no parameters to display the
spanning tree configuration for the switch and for every interface in the tree.
• Use the show spanning-tree interface command to display the spanning tree
configuration for an interface.
• For a description of the items displayed under “Spanning-tree information,”
see “Configuring Global Settings” on page 3-93. For a description of the items
displayed for specific interfaces, see “Displaying Interface Settings” on
page 3-96.
Console(config)#interface ethernet 1/5
Console(config-if)#spanning-tree protocol-migration
Console(config-if)#