SMC Networks 16 10BASE-T - Manual (Page 234)

Command Line Interface
4-58
4
show system
This command displays system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
• For a description of the items shown by this command, refer to “Displaying
System Information” on page 3-8.
• The POST results should all display “PASS.” If any POST test indicates
“FAIL,” contact your distributor for assistance.
Example
show users
Shows all active console and Telnet sessions, including user name, idle time, and IP
address of Telnet client.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Console#show system
System description: TigerSwitch 10/100 6716AL2
System OID string: 1.3.6.1.4.1.202.20.40
System information
System Up time: 0 days, 0 hours, 21 minutes, and 7.32 seconds
System Name: [NONE]
System Location: [NONE]
System Contact: [NONE]
MAC address: 12-34-12-34-12-34
Web server: enabled
Web server port: 80
Web secure server: enabled
Web secure server port: 443
Telnet server : enable
Telnet port : 23
Jumbo Frame : Disabled
POST result
DUMMY Test 1.................PASS
UART LOOP BACK Test..........PASS
DRAM Test....................PASS
Timer Test...................PASS
RTC Initialization...........PASS
Switch Int Loopback test.....PASS
Done All Pass.
Console#