Sonos Digital Music System - Manual (Page 70)

Sonos Digital Music System User Guide 5-6
Sleep modes
Light sleep. Your Controller will go into light sleep to preserve the battery life when it is
unused for a specified period of time. The screen will turn off until motion is detected
or a button is pressed. Use the Sleep Timer Docked (when connected to power
supply) and Undocked settings to select the amount of time after which your
Controller will enter light sleep.
Deep sleep. Your Controller will go into deep sleep to preserve the battery life when it is
unused for a specified period of time. When your Controller wakes from deep sleep -
either from the motion sensor or from a button touch - it will go through a restart cycle
that takes several seconds. Use the Deep Sleep Timer setting to select the amount of
time after which your Controller will enter deep sleep.
Motion sensor. The Controller has a motion sensor to automatically wake your
Controller when motion is detected. Use the Motion Sensor setting on the Controller
Settings menu to disable this feature.
Turn off Controller
Use this setting to put your Controller into deep sleep any time it will not be in use for
an extended period of time, or when you are transporting your Controller to another
destination. This setting puts the Controller into deep sleep mode immediately,
bypassing the deep sleep timer setting. The Controller cannot be turned off while it is
connected to the AC adapter or charging cradle.
Resetting Your Controller
If your Controller’s screen should freeze, press and hold the Mute and Music
buttons simultaneously on the Controller for approximately 3 seconds. The Controller
will restart momentarily.
Factory reset
If you want to join your Controller to a different Sonos Digital Music System, you must
factory reset your Controller. Select System Settings
→Controller
Settings
→Advanced Settings→Factory Reset from the Music menu.