Auto tuning – Sharp VC-MH835HM User Manual

Page 9

www.sharp.co.uk/support

INSTALLING YOUR VCR

AUTO TUNING

PROCEDURE

This model automatically tunes the TV channels for your area, then using Teletext information
sorts the TV channels into a standard order and sets the clock. If the VCR has not previously
been tuned-in, instructions will be given on screen to guide you through this procedure.

Ensure your VCR is still in the STANDBY mode.

Switch on the

Select the next available or unused channel on your TV, this will become the dedicated
video channel.

Example of
TV channels

Press the

STOP

button. The VCR will

search and display an ideal RF channel.
Wait for the flashing channel number to appear
on the VCR display, this number will be between
21 and 69.

•

If you are connected via a scart lead, go to step 6.

CAUTION:

Tune the selected channel on your TV.
(Refer to your TV manual for
instructions on how to tune in your TV).

Store this as your VCR channel.

NOTE:

Press the

SET

button to store the RF channel setting and continue with the

installation.

See next page to continue

If the clear button is pressed at this point it will not allow the TV to be tuned to the VCR. Refer
to RF through ON/OFF on page 48.

If the AUTO INSTALLATION screen doesn’t appear when you switch on your VCR or you wish
to reset your VCR and start the installation again, refer to

VCR RESET

at the back of the

book.

1 = BBC1

4 = Channel 4

2 = BBC2

5 = Channel 5

3 = ITV

? = VCR

AUT O

I NS T AL L AT I ON

P R E S S

S E T

K E Y

T O S T AR T .

S E T

: E N T E R

ME NU : E X I T

Blue

background

with

White Text

TV SCREEN

SET

EXAMPLE

TINS-A082UMN1.book Page 7 Monday, November 4, 2002 2:33 PM