Sharp VC-MH835HM - Manual (Page 34)

32
www.sharp.co.uk/support
OTHER FEATURES ON YOUR VCR
POST CODE SECURITY
This feature should allow the Police to identify you as the owner of the VCR if it is stolen. Each
time the VCR is turned on your postcode will be displayed for 5 seconds. Your postcode
cannot be changed or removed without first entering the correct PIN - number.
If you wish to use this function, follow the procedure below.
1. Press the MENU button.
2. Press the [ / ] menu select buttons to
select SET UP. Press the SET button to
confirm.
3. Press [ / ] to select POST CODE. Press the
SET button to confirm.
4. Enter your desired PIN number using the
NUMBER BUTTONS or the [ / ]
menu select buttons. This must be a 4 digit
number in the range 0000 - 9999.
5. To enter your postcode use the [ / ]
buttons to scroll through the characters and
the [ / ]buttons to move to the next
position. Press the SET button to confirm,
then press the MENU button to return to
a normal screen..
6. Write your PIN number in the box provided
for future reference.
IMPORTANT:- Please keep your Operation Manual separate from your VCR.
If you wish to change your PIN number at any time:
1. Follow steps 1 to 3 above.
2. Enter your current PIN number. Press the SET button to confirm
3. Press to re-select PIN number.
4. Enter your new PIN number. Press the SET button to confirm, then press the
MENU button to return to a normal screen.
NOTE:
• Your Postcode can be changed at any time, but you must first enter your correct PIN
number. If the wrong PIN number is entered, an ERROR message will appear. Re-enter
the correct number.
POS T COD E
P I N NUMB E R POS T COD E
- - - - - - - - - - -
S E L E C T : ǡ Ǡ CHANGE į Ĭ
E N T E R : S E T E X I T : ME NU
SET
SET
SET
SET
SET
TINS-A082UMN1.book Page 32 Monday, November 4, 2002 2:33 PM