Vcr display, Selecting the output from the vcr – Sharp VC-MH835HM User Manual
Page 44
42
www.sharp.co.uk/support
MORE INFORMATION ABOUT YOUR VCR
VCR DISPLAY
NOTE:
SELECTING THE OUTPUT FROM THE VCR
If your VCR is connected to your TV with a scart lead, when you start to play a video tape the
VCR will automatically switch its output so that playback picture is shown on the TV.
In this case ‘VCR’ will appear on the VCR display.
You can manually override this by pressing the
TV/VCR
button on the remote control.
Now the TV broadcast channel will be seen on the TV screen and ‘VCR’ will disappear from
the VCR display.
•
Pressing
TV/VCR
again will return the TV picture to the playback picture.
•
Some models do not have all the features shown, therefore, they will not appear on the
display.
1.
TIMER RECORD
indicator.
2.
VCR
MODE
indicator.
3.
TAPE MOTION STATUS
indicator
4.
RECORDING
indicator.
5.
AUDIO OUTPUT
indicator.
6.
CHILD LOCK
indicator.
7.
TAPE SPEED
indicator.
8.
VIDEO PROGRAMMING
SYSTEM/PROGRAMME
DELIVERY CONTROL
indicator.
9.
DECODER
indicator.
10.
CLOCK, TAPE COUNTER,
TAPE STATUS AND CHANNEL
PRESET STATUS
.
TINS-A082UMN1.book Page 42 Monday, November 4, 2002 2:33 PM