Sharp VC-MH835HM User Manual
Page 5
3
www.sharp.co.uk/support
BEFORE USING YOUR VCR
IMPORTANT NOTES ON YOUR VCR
IDEAL VCR LOCATION
PLACE THE VCR..
•
... on a flat level surface away from radiators
or other heat sources and out of direct
sunlight.
•
... and video tapes away from magnetic
sources such as speakers or microwave ovens.
•
... at least 8” (20cm) away from the TV.
•
... away from curtains, carpets or other
materials and allow ventilation space around
the VCR.
DO NOT...
•
... block the air-vent openings.
•
... expose the VCR to excessive dust,
mechanical vibration or shock.
•
... place any heavy object or liquid on top of
the VCR. If liquid drops inside the VCR unplug
immediately and contact your SHARP dealer.
Do not use the VCR.
•
... insert or drop anything into the tape
compartment or through the
air-vents, as this could result in serious
damage, fire or an electric shock.
POWER SOCKETS
•
To avoid overheating or even fire, insert the
plug correctly into the socket.
DO NOT...
•
... overload power sockets, this may cause a
fire or electric shock.
•
... pull the power cord to disconnect the plug
from the mains.
•
... bind the power cords together.
•
This VCR is not equipped with a mains power
switch. Accordingly, nominal current to drive
the clock is drawn at all times when the AC
power cord is plugged into a wall socket. If
the VCR is not to be used for an extended
period be sure to unplug the cord.
TINS-A082UMN1.book Page 3 Monday, November 4, 2002 2:33 PM