Recording from other equipment – Sharp VC-MH835HM User Manual
Page 32
30
www.sharp.co.uk/support
ADVANCED OPERATION
RECORDING FROM OTHER EQUIPMENT
You can record video and audio signals from various external sources, such as a camcorder,
onto a video tape using your VCR.
For example, recording from a camcorder connected to LINE 2 IN/DECODER on your VCR:
1.
Connect your signal source (eg.
Camcorder, Digital Camera etc) to the
desired scart socket on the back of the
VCR using the manufacturers
recommended cable (not supplied).
2.
Ensure that the tape on which you wish to
record is inserted into the VCR.
3.
Press the
INPUT SELECT
button
on the remote control until the VCR
display shows
L2
.
4.
Press
REC
to start recording.
OTHER CONNECTIONS
POSSIBLE!
•
If you wish to record from a source
connected to LINE 1 IN/OUT, select
L1
.
Press
REC
to start recording.
•
If you wish to record from a source
connected with audio phono leads to the
sockets on the front of the VCR, select
L3
.
Press
REC
to start recording.
NOTE:
•
There are many different ways of connecting external equipment to your VCR. Please
refer to your equipment operation manuals for further information.
LINE1(I)IN
/OUT
SON/VIDEO
(L1/I)
A2230
LINE2(II)IN/DECODER CANAL PLUS/L2(II)
AUDIO OUT
SORTIE SON
L G
R D
AERIAL IN
ENTREE ANTENNE
AERIAL OUT
SORTIE ANTENNE
Optional Scart connection (not supplied)
Mono/Stereo Camcorder
LINE1(I)IN
/OUT
SON/VIDEO
(L1/I)
AER
ENTREE
REMOTE CONTROL
7
8
0
9
➘
Input Select
TINS-A082UMN1.book Page 30 Monday, November 4, 2002 2:33 PM