Sharp VC-MH835HM User Manual
Page 29
27
www.sharp.co.uk/support
ADVANCED OPERATION
BLUE MUTE
The TV screen will be blue if a TV channel with no signal is selected, an unrecorded section of
tape is played or the quality of the recording on the tape is poor. Select OFF in the mode
menu to disable this feature.
1.
Press the
MENU
button to display the
main menu on the screen.
2.
Press the[
/
] menu select buttons to
select MODE.
3.
Press the
SET
button.
4.
Press the [
/
] menu select buttons to
select BLUE MUTE.
5.
Press
[
/
]
menu select buttons to select
AUTO or OFF.
6.
Press
SET
to confirm and then
MENU
to return to the normal screen
COLOUR
If the VCR is playing poor quality recording, the picture may turn black and white. Selecting
PAL may improve this (depending on the recording), although coloured speckles may appear
on black and white recordings.
1.
Follow steps 1 to 3 from BLUE MUTE above.
2.
Press the [
/
] menu select buttons to select COLOUR.
3.
Press
[
/
]
menu select buttons to select AUTO or PAL.
4.
Press
SET
to confirm and then
MENU
to return to the normal screen.
16:9 PLAYBACK AND RECORDING
This feature allows the PLAYBACK and RECORDING of wide screen format signals (16.9) which
should automatically change the picture size setting on a wide screen TV. To allow the
operation of this feature, ensure 16:9 mode is set to AUTO in the MODE menu.
A scart connection must be used between the VCR (SOCKET L1) and the TV.
During PLAYBACK of a 16:9 encoded tape the TV should switch to (Widescreen) 16:9 mode.
1.
Follow steps 1 to 3 from BLUE MUTE above.
2.
Press [
/
] to select 16:9.
3.
Press
[
/
]
to select AUTO or OFF.
4.
Press
SET
to confirm and then
MENU
to return to the normal screen.
MODE MENU SCREEN
N I CAM
AU T O
O F F
CO L OUR
AU T O
P A L
B L U E MU T E
AU T O
O F F
R E P E A T
ON
O F F
1 6 : 9
AU T O
O F F
SET
2
3
1
VIDEO
Plus+
SET
SET
SET
REMOTE CONTROL
TINS-A082UMN1.book Page 27 Monday, November 4, 2002 2:33 PM