Siemens SLI-5310 - Manual (Page 102)

ADSL Router User Manual
Now we are going to map USB and
the first Ethernet port together with the
bridge mode PVC. Click br_0_35 and
press Add button, then use the same
way to add USB and Ethernet1 to
grouped interfaces. The four items are
moved to the right box now.
When the setting is done, click Apply.
Now we can check the result of the
port mapping configuration. We have
a default group, in which PPPoE mode
will be applied through Ethernet port 2,
3, and 4, and we have another group
named bridge, in which the bridge
mode will be applied on USB and
Ethernet port1.
You may click to edit the created
group, press to delete it, or click Add
to create another group.
The following relationship figure illustrates the port mapping configuration.
Under this configuration, any devices that is connected to USB or Ethernet port 1 will
connect to the internet through the bridge mode PVC br_0_35, while the PCs using
Ethernet port 2, 3, and 4 will access the internet by the PPPoE connection
pppoe_0_39_1.
94