Samsung CLP-775 SERIES - Manual (Page 64)

Management tools_ 64
The printer control buttons are, as follows:
• Refresh: Renews the available machines list.
• Add Printer: Allows you to add a new machines.
• Remove Printer: Removes the selected machine.
• Set as Default: Sets the current selected machine as a default
machine.
• Stop/Start: Stops/starts the machine.
• Test: Allows you to print a test page to ensure the machine is
working properly.
• Properties: Allows you to view and change the printer properties.
Classes Tab
The Classes tab shows a list of available machine classes.
• Refresh: Renews the classes list.
• Add Class: Allows you to add a new machine class.
• Remove Class: Removes the selected machine class.
Ports configuration
In this window, you can view the list of available ports, check the status of
each port and release a port that is stalled in a busy state when its owner
has terminated the job for any reason.
• Refresh: Renews the available ports list.
• Release port: Releases the selected port.
3
Shows the status, model name and URI of your machine.
1
Shows all of the machine classes.
2
Shows the status of the class and the number of machines in the
class.
1
Switches to Ports configuration.
2
Shows all of the available ports.
3
Shows the port type, device connected to the port, and status