JVC BD-X200E - Manual (Page 37)

61
OPERATE
PHONES REV STOP PLAY
DVD RECORDER BD-X200
FWD PAUSE REC
BUSY
OPEN/CLOSE
TOP MENU MENU
OPTION DV Y/C LINE
SET UP AUDIO CH1
CH2
TITLE DOLBY DIGITAL
LPCM MPEG CHAPTER
SET
FWD button REV button
Fast-Forward & Fast-Reverse Play Slow-Forward & Slow-Reverse Play
Ⅵ Fast-forwarding
● Press the FWD button during playback or fast-reverse play
to start fast-forward play.
If the FWD button is pressed during fast-forward playback,
the machine toggles between fast- and slow-forward
playback.
Ⅵ Fast-reversing
● Press the REV button during playback or fast-forward play
to start fast-reverse play.
If the REV button is pressed during fast-reverse playback,
the machine toggles between fast- and slow-reverse
playback.
Ⅵ Slow-forwarding
● Press the FWD button in Still mode or during slow-reverse
play to start slow-forward play.
If the FWD button is pressed during slow-forward playback,
each time it is pressed the slow-forward playback speed
changes from HIGH (>>>)
† LOW (>>) † HIGH (>>>).
Ⅵ Slow-reversing
● Press the REV button in Still mode or during slow-forward
play to start slow-reverse play.
If the REV button is pressed during slow-reverse playback,
each time it is pressed the slow-reverse playback speed
changes from HIGH (<<<)
† LOW (<<) † HIGH (<<<).
Playing the Previous or Next Chapter
Ⅵ Press the t button while the DVD recorder is playing to move playback to the
start of the next chapter.
Ⅵ Press the 8 button while the DVD recorder is playing to move playback to the
start of the current chapter.
When the
8 button is pressed within 1 second of a chapter mark, playback
from the beginning of the previous chapter starts.
* The
t button is deactivated during playback of the final chapter.
TOP MENU MENU
OPTION DV Y/C LINE
SET UP
SET
t button 8 button
Note
The DVD recorder can be returned to Playback mode during fast-forward, fast-reverse, slow-forward, or slow-reverse play by
pressing the PLAY button. Still mode can be activated by pressing the PAUSE button. Stop mode is activated by pressing the
STOP button.
Ⅵ If a disc with DVD MENU TYPE item of the RECORDER [2/2] menu screen set to NONE is inserted, the introduction title or title
1 will automatically play.
Ⅵ When the end of the title is reached the next title will be played.
Playing the Previous or Next Titles
Ⅵ During playback, press the 6 button and the next title will be played.
Ⅵ During playback, press the 7 button and previous title will be played.
* During playback of the first title the
7 button is ineffective.
During playback of the final title the 6 button is ineffective.
TOP MENU MENU
OPTION DV Y/C LINE
SET UP
SET
6 button
7 button
A Disc Set with No Menu
Fast & Slow Playback
60
Playback
Playing Back a Finalized Disc
This DVD recorder can also be used to playback discs that it has recorded and finalized.
When a disc is finalized, its title menu will be used to create the top menu.
The action taken by your BD-X200 when a disc it has finalized is inserted or when playback of a title has ended will depend on the
settings of DISC IN ACTION and TITLE END as set on the RECORDER MENU (2/2) screen during recording.
* Playback may not proceed smoothly with discs recorded using different devices, regardless of whether or not they have been
finalized.
OPERATE
PHONES REV STOP PLAY
DVD RECORDER BD-X200
FWD PAUSE REC
BUSY
OPEN/CLOSE
TOP MENU MENU
OPTION DV Y/C LINE
SET UP AUDIO CH1
CH2
TITLE DOLBY DIGITAL
LPCM MPEG CHAPTER
SET
1. Insert a disc.
Depending upon the INTRODUCTION TITLE item and the DISC IN ACTION item settings of the RECORDER [2/2] menu
screen during recording, the operation will differ. Operate in accordance with the table below. (For the operation with a disc with
a DVD MENU TYPE item set to NONE, refer to page 61.)
STOP button
Cursor buttons
(
t, 8, 7, and 6)
PLAY button
PAUSE button
INTRODUCTION TITLE item setting during recording
Set to OFF Set to ON
The action set in the DISC IN ACTION item is carried out.
(See below.)
4. Set to Still mode.
This is done by pressing the PAUSE button.
● The DVD recorder enters Still mode.
● If the PAUSE button is then pressed again in Still mode, the DVD recorder will advance playback by a single frame.
5. Restart playback.
Press the PLAY button.
Ⅵ The DVD recorder will behave as follows when title playback has ended.
These actions will depend on the setting made for TITLE END from the RECORDER MENU (2/2) screen during recording.
6. Stop playback.
This is done by pressing the STOP button.
● The DVD recorder enters Stop mode.
The introduction title (opening movie) is automatically played.
After playback is finished, the action set in the DISC IN ACTION
item is carried out. (See below.)
TITLE END item setting during recording
Set to MENU Set to REPEAT Set to STOP Set to NEXT TITLE
Enters stop mode and the title
menu (TOP MENU) is displayed.
SET button
DISC IN ACTION setting made during recording
MENU TITLE
The title menu will appear
2. Select the number of the title to be played.
Use the t, 8, 7, and 6 buttons to select the title number
for playback.
3. Press the SET button to begin playback.
Playback starts automatically from the first title.
Repeats playback within the
title. Enters the stop mode. The title
menu (TOP MENU) is not
displayed. Next title is played. When
playback of the final title
finished, the first title is played.
(Disc repeat playback)
Note
When the introduction title (opening movie) is played on another DVD
player only the STOP button is accepted.
Caution
● During playback of a disc, if
the input setting is DV then
the sound can be delayed.
In this case, change the
input setting to LINE or Y/C.
● If the disc is dirty or
damaged good playback
may not be possible. In this
case either clean the disc or
change it.