JVC T-V Link AV28CT1EP - Manual (Page 59)

22
EXT SETTING
AV28CT1EK/EI / LCT1138-001A-U / English
■ ■ ■ ■ DUBBING DUBBING DUBBING DUBBING
You can choose a signal source to be output from the EXT-2
terminal.
You can do this with the output signal of the device connected
to another EXT terminal, or the picture and sound from a TV
channel you are currently viewing.
1 Press the 5 buttons to choose the EXT-2
terminal.
2 Press the 6 buttons to choose another
EXT terminal or TV.
The arrow in the menu represents a signal flow. The left
side of the arrow shows a signal source output from the
EXT-2 terminal.
EXT-1/EXT-3/EXT-4:
The output signal of the device connected to an EXT
terminal passes through the TV and is output from the
EXT-2 terminal.
TV:
The picture and sound of the TV channel you are
currently viewing are output from the EXT-2 terminal.
3 Press the
a
button to complete the
setting.
The menu disappears.
• During dubbing, you cannot turn off the TV. Turning
off the TV also turns off the output from the EXT-2
terminal.
• When you choose an EXT terminal as an output, you
can view a TV programme or a picture from the other
EXT terminal while dubbing the picture from a
device connected to the EXT terminal onto a VCR
connected to the EXT-2 terminal.
The RGB signals from TV games cannot be
output.Teletext programmes cannot be output.
AV28CT1EKEI.book Page 22 Tuesday, December 18, 2001 10:20 AM