JVC T-V Link AV28CT1EP - Manual (Page 17)

16
AV28CT1EP / LCT1136-001A-U / English
PICTURE FEATURES PICTURE FEATURES PICTURE FEATURES PICTURE FEATURES
To display the PICTURE FEATURES menu:
1 Press the a a a a button to display MENU
(main menu).
2 Press the 6 button to choose PICTURE
FEATURES, and press the a a a a button.
■ ■ ■ ■ AUTO VNR AUTO VNR AUTO VNR AUTO VNR
The AUTO VNR function optimally reduces noise of the TV
automatically according to the noise of the current picture.
The function also adjusts the optimum Sharpness (SHARP).
1 Press the 6 buttons to choose AUTO
VNR.
2 Press the 5 buttons to choose AUTO.
MIN:
The AUTO VNR function is cancelled. When you set the
mode to AUTO but feel that the sharpness of the original
picture has not be reproduced fully, change the mode to
MIN. However, a noise remaining in the original picture
may be emphasized.
MAX:
This mode always maximizes the noise reduction effect
irrespective of state of the picture. When you set the
mode to AUTO but feel that the noise is remarkable,
change the mode to MAX. However, this may reduce the
sharpness of the picture.
3 Press the a a a a button to complete the set-
ting.
The menu disappears.
■ ■ ■ ■ COLOUR SYSTEM COLOUR SYSTEM COLOUR SYSTEM COLOUR SYSTEM
The colour system is chosen automatically. However, if the
picture is not clear or no colour appears, choose the colour
system manually.
1 Press the 6 buttons to choose COLOUR
SYSTEM. Then press the a a a a button.
The Sub-menu of the COLOUR SYSTEM function ap-
pears.
2 Press the 5 buttons to choose the ap-
propriate colour system.
PAL:
PAL system
SECAM:
SECAM system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from the input sig-
nal. Only when you are viewing a picture from Pro-
gramme number PR 0 (AV), or EXT terminal, you can
choose using the AUTO function.
3 Press the a a a a button to complete the set-
ting.
The menu disappears.
Note:
• The AUTO function may not function properly if you
have poor signal quality. If the picture is abnormal in
the AUTO function, choose another colour system
manually.
• When in the Programme numbers PR 0 (AV) to PR
99, you cannot choose NTSC 3.58 or NTSC 4.43.
AV28CT1EP_EN.book Page 16 Tuesday, December 18, 2001 1:20 PM