JVC T-V Link AV28CT1EP - Manual (Page 22)

21
ENG
L
ISH
AV28CT1EP / LCT1136-001A-U / English
FEATURES FEATURES FEATURES FEATURES
To display the FEATURES menu:
1 Press the a a a a button to display MENU
(main menu).
2 Press the 6 button to choose FEATURES.
Then press the
a a a a button.
■ ■ ■ ■ SLEEP TIMER SLEEP TIMER SLEEP TIMER SLEEP TIMER
You can set the TV to automatically turn off after a specified
period of time.
1 Press the 6 buttons to choose SLEEP
TIMER. Then press the a a a a button.
A Sub-menu of the SLEEP TIMER function appears.
2 Press the 5 buttons to set the period of
time.
You can set the period of time a maximum of 120 min-
utes (2 hours) in 10 minute increments.
To cancel the SLEEP TIMER function:
Press the 2 button to set a period of time to “OFF.”
3 Press the a a a a button to complete the set-
tings.
The menu disappears.
Note:
• One minute before the SLEEP TIMER function turns
off the TV, “GOOD NIGHT!” appears.
• The SLEEP TIMER function cannot be used to turn
off the TV’s main power.
• When the SLEEP TIMER function is on, you can dis-
play the Sub-menu of the SLEEP TIMER function
again to confirm and/or change the remaining peri-
od of time of the SLEEP TIMER function. Press the
a button to exit the menu after confirming and / or
changing the remaining time.
■ ■ ■ ■ BLUE BACK BLUE BACK BLUE BACK BLUE BACK
You can set the TV to automatically change to a blue screen
and mute the sound if the signal is weak or absent, or when
there is no input from an external device.
1 Press the 6 buttons to choose BLUE BACK.
2 Press the 5 buttons to choose ON.
To cancel the BLUE BACK function:
Press the 5 buttons to choose OFF.
3 Press the a a a a button to complete the setting.
The menu disappears.
■ ■ ■ ■ CHILD LOCK CHILD LOCK CHILD LOCK CHILD LOCK
When there is a TV channel you wish your children not to
watch, you can use the CHILD LOCK function to lock out the
TV channel. Even when a child chooses a Programme
number (PR) in which a locked TV channel has been regis-
tered, the screen will change to blue and displays
n (CHILD
LOCK) so the TV channel cannot be viewed. Unless you en-
ter a pre-set ID number by a special operation, the lock can-
not be released and the child cannot view the TV channel
programs.
To set the CHILD LOCK function To set the CHILD LOCK function To set the CHILD LOCK function To set the CHILD LOCK function
1 Press the 6 buttons to choose CHILD
LOCK. Then press the o
o o o button.
“SET ID NO.” (ID number setting screen) appears.
2 Set the ID number to your liking.
1 Press the 6 buttons to choose a number.
2 Press the 5 buttons to move the cursor.
3 Press the a a a a button.
The Sub-menu of CHILD LOCK appears.
4 Press the 6 buttons to choose a TV
channel.
Every time you press the 6 buttons, the Programme
number (PR) changes, and the picture of the TV channel
registered in the Programme number (PR) is displayed
on the screen.
AV28CT1EP_EN.book Page 21 Tuesday, December 18, 2001 1:20 PM