JVC T-V Link AV28CT1EP - Manual (Page 27)

INSTALL
26
AV28CT1EP / LCT1136-001A-U / English
DELETE DELETE DELETE DELETE
1 Press the 6 6 6 6 buttons to choose a TV
channel.
Every time you press the 6 buttons, the Programme
number (PR) is changed over, and the picture of the TV
channel registered in the Programme number (PR) ap-
pears on the screen.
2 Press the yellow button to delete the TV
channel.
The TV channel is deleted from the Programme num-
bers (PR) list.
MANUAL MANUAL MANUAL MANUAL
Preparation:
• As long as you register the TV channel (SECAM-L system)
from a French station, be sure to set the COUNTRY setting
to FRANCE. If the COUNTRY setting is not FRANCE, follow
the description “Changing the COUNTRY setting” on page
28 to change the COUNTRY setting to FRANCE, then start
the MANUAL function.
1 Press the 6 6 6 6 buttons to choose a Pro-
gramme number (PR) to which you want to
register a new TV channel.
2 Press the blue button to activate the MAN-
UAL function.
At the right side following the CH/CC number, the SYS-
TEM (broadcasting system) of the TV channel appears.
To cancel the MANUAL function:
Press the h (Information) button.
3 Press the 3 3 3 3 button to choose the SYSTEM
(broadcasting system) for a TV channel
you want to register.
TV channel (SECAM-L system) from a French
station:
Set the SYSTEM to “L”. If it is set to one other than “L”,
you cannot receive the TV channel of the SECAM-L sys-
tem.
Other TV channels:
If you do not know the correct broadcasting system, set
the SYSTEM to “B/G”. If “B/G” is not correct, it results in
the fact that you will not hear the sound normally when
the TV detects a TV channel. In this case, retry to set the
SYSTEM again correctly so that no problem arises.
4 Press the green or red button to search for
a TV channel.
Scanning stops when the TV finds a TV channel. Then
the TV channel is displayed.
5 Press the green or red button repeatedly
until the TV channel you want appears.
If the TV channel reception is poor:
Press the blue or yellow button to fine-tune the TV chan-
nel.
If you cannot hear the normal sound even when
the picture of the TV channel appears normal-
ly:
The SYSTEM setting is wrong. Press the 3 3 3 3 button and
choose a SYSTEM that has normal sound.
6 Press the a a a a button and register the TV
channel to a Programme number (PR).
The normal EDIT menu is resumed.
AV28CT1EP_EN.book Page 26 Tuesday, December 18, 2001 1:20 PM