JVC VN-C655 - Manual (Page 10)

10
ⅥCeiling Mount ⅥCamera
7 Camera Terminal (Female)
Connect to 0, the Male Terminal on the cam-
era.
8 Drop Prevention Hook
Attach the Drop Prevention Wire & to this hook
to prevent the camera from falling.
9 Clamping Holes (x 4)
Attach the camera to a ceiling using these
holes.
0
Camera Terminal (Male)
Connect to 7, the Female Camera Terminal
on the Ceiling Mount.
! Camera Body Cover
Do not remove the camera body cover while
the camera is installed on a ceiling. Doing so
will cause the dome cover to fall down.
@ Dome Cover
The dome cover is fragile. Take care when
handling it.
# Lens
The lens is not a replaceable item.
$ Camera Clamping Bracket
In order to clamp the camera onto the Ceiling
Mount, insert and tighten the Locking Screw
2 into this bracket.
%
Drop Prevention Wire
Attach this wire to the Drop Prevention Hook
8 on the Ceiling Mount.
Name and Function of Parts (continued)
(Camera Connector side)
9
9
7
8
0
#
$
%
!
@
Introduction
VN-C655(B)_0202_p2-21 05.3.16, 6:24 PM 10