JVC VIDEO PLUS HR-S6965EK - Manual (Page 45)

advanced features 45
Auto Timer
When the AUTO TIMER is set to ON , the timer is automatically engaged when the VCR power is
turned off and automatically disengaged when the VCR is powered back on.
get to the mode set screen
Press . Move the highlight
bar to MODE SET using the
PR
and
PR
buttons and press
(or E).
enable/disable auto timer Select AUTO TIMER using the
PR and
PR
buttons and press (or E) to toggle between
ON and OFF .
return to normal screen Press .
Auto Power Off/3H
When this function is set to “3H”, the recorder is turned off
automatically if no operation is done within 3 hours. “AUTO
POWER OFF IN 3 MIN” appears on the screen 3 minutes before
the recorder is turned off.
get to the mode set screen
Press . Move the highlight
bar to MODE SET using the PR and
PR
buttons and press
(or E).
select auto power mode
Move the highlight bar to AUTO
POWER using the
PR
and
PR
buttons. Press (or E) to
select 3H or OFF .
return to normal screen Press .
Repeat Playback
start repeat pl ayback Press ., then press and hold . again for over 5 seconds, then release.
The Play indicator (
#
) will flash on the display panel and the VCR will automatically playback
and rewind the tape 100 times and then stop.
stop pl ayback Pressing S, ., < or > stops repeat playback.
Next Function Memory
pl ay To playback immediately after rewinding, press < and then . within 2 seconds.
power off To power off the VCR immediately after rewinding, press < and then o
within 2 seconds.
timer standby
To put the VCR in timer standby mode immediately after rewinding, press
< and then c within 2 seconds.
[1] a k
[MENU]: EXIT
MODE SET
S-VHS ET OFF
B.E.S.T. ON
PICTURE CONTROL AUTO
AUTO TIMER ON
O.S.D. ON
AUTO SP a LP TIMER OFF
POWER SAVE OFF
NEXT PAGE
F
[1] a k
[MENU]: EXIT
MODE SET
PREVIOUS PAGE
VIDEO STABILIZER
OFF
S-VHS ON
AUTO POWER OFF 3H F
HR-S6965EK-EN/p43-47 2/19/03, 07:56 PM 45