JVC VIDEO PLUS HR-S6965EK - Manual (Page 33)

advanced features 33
Super VHS (S-VHS), S-VHS ET and VHS
Your VCR can record in S-VHS, S-VHS ET or VHS.
To record in S-VHS:
Perform the steps below to set S-VHS to ON . Then, insert a cassette marked ‘S-VHS’, the S-VHS
indicator will light on the display panel. The S-VHS recording mode will be selected.
To record in S-VHS ET on a VHS cassette:
See ‘Super VHS ET (S-VHS ET)’ on page 33.
To record in VHS:
Insert a cassette marked ‘VHS’. If the S-VHS ET indicator on the VCR is lit and the S-VHS ET
mode is activated, press
S-VHS ET . The indicator goes off. The VHS recording mode will be
automatically selected regardless of the S-VHS mode setting.
To record in VHS on an S-VHS cassette:
Insert the cassette marked ‘S-VHS’, the S-VHS indicator will light on the display panel. Then,
perform the steps below to set the
S-VHS to OFF ; the S-VHS indicator will go out. The VHS
recording mode will be selected.
get to the mode set screen Press . Move the highlight bar to MODE SET using the PR
and
PR
buttons and press (or E).
select s-vhs mode Move the highlight bar to S-VHS using the PR and
PR
buttons. Press
(or E) to set to ON or OFF .
return to normal screen
Press .
NOTE:
When playing back a tape that has been recorded in S-VHS or S-VHS ET, the S-VHS indicator
lights on the display panel regardless of the ‘S-VHS’ mode setting.
HR-S6965EK-EN/p29-42 2/19/03, 07:56 PM 33