JVC VIDEO PLUS HR-S6965EK - Manual (Page 39)

advanced features 39
Editing
L-1 OUTPUT Setting
The L-1 IN/OUT connector delivers either a composite signal (regular video
signal) or a Y/C signal (a signal in which the luminance and chrominance signals
are separated). Set
L-1 OUTPUT to the appropriate mode depending on the type of
unit connected to the rear panel L-1 IN/OUT connector of this VCR.
get to the output/input set screen Press . Move the highlight bar to
OUTPUT/INPUT SET using the
PR
and
PR
buttons and press (or E).
select mode Move the highlight bar to L-1
OUTPUT using the
PR
and
PR
buttons. Press
(or E) to select the desired mode:
FOR L-1 OUTPUT
• VIDEO : If a connected device’s input is
compatible only with regular
video signals, set to
VIDEO .
• S-VIDEO : If a connected device’s input is
compatible with Y/C signals, set to
S-VIDEO . This setting will let you take advantage of higher-quality
S-VHS pictures. (For connection, be sure to use a 21-pin SCART
cable that is compatible with the Y/C signal.)
return to normal screen
Press .
[1] a k
[MENU]: EXIT
OUTPUT/INPUT SET
L-1 OUTPUT VIDEO
L-2 INPUT VIDEO
F
HR-S6965EK-EN/p29-42 2/19/03, 07:56 PM 39