JVC VIDEO PLUS HR-S6965EK - Manual (Page 44)

advanced features 44
Power Save Mode
You can reduce the power consumption while the VCR is turned off.
get to the mode set screen Press . Move the highlight
bar to MODE SET using the
PR
and
PR
buttons and press
(or E).
select power save mode
Move the highlight bar to POWER
SAVE using the PR and
PR
buttons. Press (or E) to
select ON or OFF .
return to normal screen Press .
NOTES:
• During Power Save, the display panel will be turned off.
• The Just Clock function (
੬ pg. 51) does not work while the Power Save mode is engaged.
• While the VCR is in the Power Save mode, the picture may be distorted momentarily when
you turn on/off the VCR.
• Power Save does not work when ...
... the VCR is in the Timer mode.
... the VCR’s power is turned off after timer-recording (or Instant Timer Recording).
Auto SP a LP Timer
When timer recording in SP mode, if the VCR calculates that there isn’t enough tape to record
the complete programme, it will automatically switch from SP to LP mode.
get to the mode set screen
Press . Move the highlight
bar to MODE SET using the PR and
PR
buttons and press
(or E).
enable/disable auto sp alp timer Select AUTO SPaLP
TIMER using the
PR
and
PR
buttons and press (or E)
to toggle between ON and OFF .
return to normal screen
Press .
[1] a k
[MENU]: EXIT
MODE SET
S-VHS ET OFF
B.E.S.T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
O.S.D. ON
AUTO SP a LP TIMER OFF
POWER SAVE OFF
NEXT PAGE
F
[1] a k
[MENU]: EXIT
MODE SET
S-VHS ET OFF
B.E.S.T. ON
PICTURE CONTROL AUTO
AUTO TIMER OFF
O.S.D. ON
AUTO SP a LP TIMER OFF
POWER SAVE OFF
NEXT PAGE
F
HR-S6965EK-EN/p43-47 2/19/03, 07:56 PM 44