JVC TH-C90 - Manual (Page 87)

34
Repeating a desired part [A-B Repeat]
You can repeat playback of a desired part by
specifying the beginning (point A) and ending
(point B).
7 During playback
1
Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2
Press Cursor 3/2 to highlight .
3
Press ENTER.
4
Press Cursor Y/5 repeatedly to select
“A-B”.
5
Press ENTER at the beginning of the
part you want to repeat (point A).
The repeat mode indicator “ ” appears on the display
window.
6
Press ENTER at the end of the part you
want to repeat (point B).
The repeat mode indicator on the display window changes to
“
” and A-B Repeat Playback starts.
7
Press ON SCREEN.
The on-screen bar disappears.
To cancel
Select “OFF” in step 4, then press ENTER.
NOTE
• When playing back a DVD VIDEO/DVD VR, A-B Repeat Playback is
possible only within the same title.
• “A-B” cannot be selected during Program and Random Playback.
• “A-B” cannot be selected during playback with PBC function.
You can lock the tray and prohibit unwanted disc ejection.
On the center unit ONLY:
7 While the system is turned off
• “LOCKED” appears on the display window.
• If you try to eject the disc, “LOCKED” appears to indicate that
the tray is locked.
To cancel
Carry out the same operation again.
• “UNLOCKED” appears on the display window.
IMPORTANT
Before using the remote control for the following
operation;
• Set the remote control mode selector to AUDIO.
NOTE
• Before you start operation; There is a time limit when
doing the following steps. If the setting is canceled before you finish,
start from step 1 again.
1
Press SETTING.
2
Press Cursor 3/2 to make an
adjustment or selection.
You can adjust the balance of the sound between “R (right)
–21” and “L (left) –21”. To set the balance to normal, select
“CNTR (center)”.
The adjustment is set and the display automatically disappears
a few seconds later.
Tray lock
Setting the sound balance
Press and hold
Advanced operations See page 24 for button locations.
TH-C90[A].book Page 34 Monday, August 7, 2006 11:44 AM