JVC TH-C90 - Manual (Page 12)

9
7 Assembling the front speakers — TH-C90
Before assembling —
• Prepare a Phillips screwdriver (not supplied).
Take care not to drop any component part while assembling;
otherwise, it may cause damage to the floor or injury.
CAUTION
• NEVER insert your finger in between the speaker and the base plate,
as it may get hurt.
7 Connecting the center and surround speakers — TH-C90
To remove the speaker grilles:
The speaker grilles of the satellite speakers are removable.
The following procedure explains the removal of SP-THC90S’s
speaker grille. You can remove speaker grilles of other speakers by
the same procedure.
Connecting the satellite (front,
center, surround) speakers
Front speaker (SP-THC90F) (2) Base plate (2)
Speaker
Base plate
Screw M4 x 30 mm
(supplied)
1
Direction of the base plate:
Make the short side front when fixing the base plate.
Speaker (front side)
2
Red Clear
Black Black striped
Surround speaker
(SP-THC90S) (2)
Center speaker
(SP-THC90C) (1)
Red Clear
Black
Black striped
Holes Projections
Speaker grille
Connections Do not connect the power cord until all other connections have been made.
EN_TH-C906020[USUGUX].book Page 9 Thursday, June 29, 2006 5:30 PM