Juniper Networks IDP SERIES IDP250 User Manual
Page 54
To import an IDP Series device with a known IP address:
1.
In the NSM navigation tree, select
Device Manager > Devices
.
Figure 12: NSM Add Device Wizard: Add Device
2.
Click the + icon and select
Device
to display the Add Device wizard.
3.
Select
Device Is Reachable
(default) and click
Next
to display the page where you
configure connection settings.
Figure 13: NSM Add Device Wizard: Connection Settings
4.
In the Specify Connection Settings dialog box, enter the following connection
information:
•
Enter the IP address of the IDP Series device.
•
Enter admin for the username of the device admin user.
•
Enter the password for the device admin user. You set the password for admin when
you ran the ACM Wizard.
Copyright © 2012, Juniper Networks, Inc.
42
IDP250 Installation Guide