Juniper Networks IDP SERIES IDP250 - Manual (Page 36)

Mounting to Midmount Brackets
To mount the appliance using the midmount brackets:
1. Attach one rack-mounting bracket to each side of the chassis with the bracket screws.
Figure 10: 1-RU Midmount Bracket
2. With another person, place the chassis into position between rack posts in the
equipment rack and align the rack-mounting bracket holes with the rack post holes.
CAUTION: Be sure to leave at least two inches of clearance on the sides
of each chassis for the cooling air inlet and exhaust ports.
3. Secure the chassis to the rack with the rack screws.
Related
Documentation
Rack Mounting Kits and Required Tools on page 23 •
Copyright © 2012, Juniper Networks, Inc. 24
IDP250 Installation Guide