Performing the initial configuration, Chapter 5, Performing the initial configuration” on – Juniper Networks IDP SERIES IDP250 User Manual
Page 39
CHAPTER 5
Performing the Initial Network
Configuration and Licensing Tasks
This chapter includes the following topics:
•
Performing the Initial Configuration on page 27
•
Getting Started with the EasyConfig Wizard (Serial Console Port) on page 29
•
Getting Started with the QuickStart Wizard (Management Port) on page 30
•
Getting Started with the ACM Wizard (Management Port) on page 31
•
Installing the Product License Key on page 31
Performing the Initial Configuration
We recommend the following workflow to perform the initial configuration:
1.
In the machine room, connect your laptop to the serial port and run the EasyConfig
script to assign the management interface an IP address you can reach from your
subnet.
2.
From your desk, run the ACM wizard from your Web browser. Be sure to change the
default passwords.
In some circumstances, you might not be able to use the serial console or might prefer
to get started with a simple configuration for limited purposes. For these cases, we
support alternative methods for getting started.
summarizes the
getting started configuration tools.
27
Copyright © 2012, Juniper Networks, Inc.