Insert editing 8 editing – JVC SR-W5U User Manual
Page 30
30
Insert Editing
8 EDITING
(Ex.) Insert Editing using 2 units of SR-W5U in the HD mode.
LINE 2
VIDEO
INPUT
AC
OUTPUT
MAX
100W
AC
INTPUT
120V
60Hz
AUDIO IN
HD/S3(W-VHS)
HD(CAM/W-VHS)
(HDTV/W-VHS)
HD(HDTV/W-VHS)
RGB(DISPLAY)
HD VIDEO IN
HD VIDEO OUT1
HD VIDEO OUT2
AUDIO OUT3
OUTPUT
S
R
R
L
R
L
Y
P
B
P
R
Y
P
B
P
R
L
VIDEO
R.A. EDIT
PRE ROLL
S
REMOTE
R
L
LINE 3
LINE 1
LINE 1
LINE 2
(
)
LINE 2
VIDEO
INPUT
AC
OUTPUT
MAX
100W
AC
INTPUT
120V
60Hz
AUDIO IN
HD/S3(W-VHS)
HD(CAM/W-VHS)
(HDTV/W-VHS)
HD(HDTV/W-VHS)
RGB(DISPLAY)
HD VIDEO IN
HD VIDEO OUT1
HD VIDEO OUT2
AUDIO OUT3
OUTPUT
S
R
R
L
R
L
Y
P
B
P
R
Y
P
B
P
R
L
VIDEO
R.A. EDIT
PRE ROLL
S
REMOTE
R
L
LINE 3
LINE 1
LINE 1
LINE 2
(
)
The unit as a playback machine
The unit as a recording machine
To AUDIO OUT 3
connector
To HD
VIDEO
OUT 1
connector
To AUDIO IN
(HD/S3)
connector
To HD
VIDEO IN
connector
●
Press the COUNTER RESET button to cancel Insert Editing at any time. Editing will end and the recorder will enter the
Play mode.
●
During Insert Editing , press the A.DUB button after pressing the INSERT button in step 5 to dub the same sound as the
Hi-Fi audio soundtrack onto the normal audio soundtrack.
changes to
on the front panel display window.
The facility does not work with a W-VHS tape since the normal soundtrack will not be recorded.
●
If the recording's speed (SP/EP) changes in the middle of an insert edit, the inserted picture will be distorted at the
switching point.
●
Insert editing continues even though the blank portion of the recording appears during insert editing.
●
Insert editing replaces part of a recorded tape with a new picture and Hi-Fi audio soundtrack. Please be advised that the
edit-out point will not be the same as the registered value if there is a blank portion in the recording.
OPERATE
HI-FI AUDIO
SELECT
EJECT
BALANCE
REC LEVEL
L
R 0
10
AUDIO OUT
SELECT
629
TBC
COUNTER
/REMAIN
COUNTER
RESET
ZERO
SEARCH
MARK
ERASE
OPERATE
HD
SD
S-VHS
IN — R.A.E. — OUT
REW
FF
INDEX SEARCH
INSERT
A.DUB
REC
SP/EP
HD INPUT
R.A.EDIT
IN/OUT
REV
FWD
START
PREROLL EDIT
START
JOG
SHUTTLE
PAUSE
STOP
PLAY
PAUSE/STIL
INPUT
SELECT
INDEX
The unit as a playback machine
6 Start playback shortly before the section where you
want to insert.
The unit as a recording machine
7 Press the PLAY button at the section you want to
insert.
• Insert editing starts.
• Insert editing automatically stops when the
counter reaches 0:00:00 and playback starts.
8 Press the STOP button.
The unit as a playback machine
9 Press the PLAY button.
The unit as a recording machine
1 Select the connected input (Hd) by pressing the HD
INPUT button.
2 Play the tape back to determine the edit-out point
(the end of the segment) with JOG dial or
SHUTTLE ring, then engage the still playback
mode.
3 Press the COUNTER RESET button to set the
counter reading to 0:00:00.
4 Determine the edit-in point (the beginning of the
segment to be replaced) with JOG dial or
SHUTTLE ring, then engage the still playback
mode.
5 Press the INSERT button.
appears on the front panel display window and
this unit enters the insert pause mode.
COUNTER RESET
INSERT
JOG DIAL/
SHUTTLE RING
HD INPUT