JVC Everio GZ-HD6 - Manual (Page 62)

62
8 When you have fi nished operation
Always follow the procedures below when
disconnecting the camera, or turning off the
camera/computer power.
Failing to do so may cause damage to the
camera and computer.
1) Drag & drop the recording medium icon
on the desktop into the [Trash] icon. If
the confi rmation message appears, click
[OK].
2) Confi rm that the access/charge lamp on
the camera does not light or blink. If the
access/charge lamp lights or blinks, wait
until it is turned off before proceeding.
3) Disconnect the USB cable.
4) Turn off the camera and computer.
Connecting the Camera to the
Macintosh
Preparation:
Set the camera’s power/mode switch to OFF.
NOTES
• Never disconnect the USB cable while the
access/charge lamp on the camera lights or
blinks.
• Do not turn off the camera when the USB
cable is connected, to prevent malfunctions
of the computer.
• Connect the camera directly to the
computer, not through a hub.
• Do not use an extension USB cable.
• When you copy fi les from the computer to
the recording medium on the camera, do not
include any other fi les than those recorded
on the camera.
• Do not delete, move, or rename the fi les and
folders in the camera from the computer.
File Backup on a Macintosh
(Continued)
DC Connector
AC Adapter
To AC Outlet
USB Cable
USB Connector
USB Connector