JVC Everio GZ-HD6 - Manual (Page 21)

21
ENGLISH Still Image Recording
Preparation: Set the power/mode switch to ON.
Slide the power/mode switch to
MODE to select
(still image)
mode.
MODE The switch returns to
the original position
when it is released.
The lamp on the camera lights up.
Press the PLAY/REC button to
select the recording mode.
PLAY/REC
SELECT
19
The lens cover opens automatically.
Press and hold the SNAPSHOT
button halfway.
[ FINE 1920
The indicator becomes green when
the captured image is focused.
Press the SNAPSHOT button to
start recording.
PHOTO
[ 9 9 9 9 ] FINE 20
NOTES
• If the camera is not operated for 5 minutes while the power is on, it turns itself off automatically
to conserve power. To turn the camera on again when using the battery pack, set the power/
mode switch to OFF, then to ON. When using the AC adapter, perform any operation such as
zooming.
• The sides of still images recorded in 16:9 size may be cut off when printed. Check whether
16:9 size prints can be printed at your local print store.
8 To change the picture quality
Change the settings in [QUALITY].
(
੬ p. 67)
8 To record still images continuously
Set [CONTINUOUS SHOOTING] to [ON].
(
੬ p. 68)
8 To change the image size
Change the settings in [IMAGE SIZE].
(
੬ p. 67)