JVC Everio GZ-HD6 - Manual (Page 11)

11
ENGLISH Attaching the Shoulder Strap
Peel off the pad and thread
the end of the strap through
the eyelet. Thread the strap through the
buckle, adjust its length, and use
the strap guide to fi x it in place. Position the buckle near
the eyelet and reattach
the pad.
Preparing the Remote Control
A battery is included inside the remote control at the time of purchase.
Remove the insulation sheet before use.
Beam Effective Area
NOTE
The transmitted beam may not be effective
or may cause incorrect operation when the
remote sensor is directly exposed to sunlight
or powerful lighting.
To Reinsert the Battery
Pull out the battery holder by pressing the
lock tab.
Attaching the Core Filter to the DC Cord
Attach the core fi lter to the DC cord. The core fi lter reduces interference. Connect the end of the
cable with the core fi lter to the camera.
Eyelet
Strap Guide
Buckle
Effective distance:
Max. 5 m (16 ft)
Remote Sensor
Lock Tab
Lithium Battery
(CR2025)
Release the stopper. 3 cm (1-3/16 " ) Wind once.