JVC RM-SR774XU - Manual (Page 60)

57
English
Searching a Disc (Only for the CD player)
Search a disc by its performer:
1. Display the disc information screen by following the procedure on page 56.
2. Press ON SCREEN CONTROL
% / fi to move
to “SEARCH,” then
press SET.
The DISC SEARCH screen appears on the TV.
3. Press ON SCREEN CONTROL
% / fi to move
to “PERFORMER”, then
press SET.
The PERFORMER SEARCH screen appears.
4. Press ON SCREEN CONTROL
% / fi / @ / # to move
in front of the
first character of the performer you want to search, then press SET.
To correct the incorrect entry, press ON SCREEN CONTROL % / fi to move
in front of the correct character, then press SET.
To erase the incorrect entry, press ON SCREEN CONTROL % / fi to move to
CANCEL, then press SET.
5. Press SET again.
Disc search starts, then the SEARCH RESULT screen, showing the performers,
appears.
6. On the SEARCH RESULT screen, you can do the following:
• Changing the indication of the disc information: Press ON SCREEN
CONTROL % / fi
to move to a searched disc, then press @ / #. Each time you
press
@ / #, the disc information alternates between its performer an its disc title.
• Going to the Disc Information screen (see page 56): Press ON SCREEN
CONTROL % / fi
to move to a searched disc, then press SET.
• Showing unseen disc information (if more than 5 discs are listed as a result of
the search): Press ON SCREEN CONTROL
% / fi
to move to (or ),
then press SET.
• Going back to the PERFORMER SEARCH screen: Press EXIT.
Search a disc by its disc title:
1. Display the disc information screen by following the procedure on page 56.
2. Press ON SCREEN CONTROL
% / fi to move
to “SEARCH,” then
press SET.
The DISC SEARCH screen appears on the TV.
3. Press ON SCREEN CONTROL
% / fi to move
to “DISC TITLE”, then
press SET.
The DISC TITLE SEARCH screen appears.
4. Press ON SCREEN CONTROL
% / fi / @ / # to move
in front of the
first character of the disc title you want to search, then press SET.
To correct the incorrect entry, press ON SCREEN CONTROL
% / fi
move in
front of the correct character, then press SET.
To erase the incorrect entry, press ON SCREEN CONTROL
% / fi
move to
CANCEL, then press SET.
DISC SEARCH screen
PERFORMER SEARCH
screen
TEXT COMPU LINK Remote Control System
DISC TITLE SEARCH screen
DISC SEARCH screen
SEARCH RESULT screen
Note:
Symbols such as @, # or $
cannot be available for search.
EN47_72.RX-774P[U]/1 98.3.10, 2:55 PM 57