JVC RM-SR774XU - Manual (Page 28)

25
English
Rear Speaker Setting
Register whether you have connected the rear speakers or not.
On the front panel only:
1. Press SETTING repeatedly until “REAR SPK”
(Rear Speaker) appears on the display.
The display changes to show the current setting.
2. Turn MULTI JOG to register whether you have
connected the rear speaker or not, while the
indication of the previous step is still on the display.
As you turn it, the rear speaker setting alternates
between “YES” and “NO.”
YES: Select this mode when you use rear speakers.
NO: Select this mode when you do not use rear speakers.
Delay Time Setting
Register the delay time of the sound from the rear speakers, comparing the sound from
the front speakers.
On the front panel:
1. Press SETTING repeatedly until “DELAY TIME”
appears on the display.
The display changes to show the current setting.
2. Turn MULTI JOG to select the delay time of the rear
speaker output, while the indication of the previous
step is still on the display.
As you turn it, the delay time changes as follows:
As the distance from you to your rear speakers decreases, you will get the better
surround sound by using smaller delay time.
From the remote control:
1. Press SOUND CONTROL.
2. Press DELAY repeatedly until an appropriate delay
time appears on the display.
Each time you press the button, the delay time changes
as follows:
Note:
When you change your
speakers, you need to register
the information about the
speakers again.
SETTING
Basic Settings
MULTI JOG
MULTI JOG
SETTING
10
DELAY
RETURN
SOUND
CONTROL
DELAY 15msec DELAY 20msec
DELAY 30msec
DELAY 15msec DELAY 20msec DELAY 30msec
EN20_46.RX-774P[U]/1 98.3.10, 2:50 PM 25