JVC RM-SR774XU - Manual (Page 51)

48
English
Adjusting the Front Speaker Output Balance (Also see page 23)
1. Press any button of ON SCREEN CONTROL
% / fi / @ / # once.
The MAIN MENU appears on the TV.
2. Press ON SCREEN CONTROL
% / fi to move
to “SOUND CONTROL,”
then press
@ / #.
The SOUND CONTROL menu appears on the TV.
3. Press ON SCREEN CONTROL
% / fi to move
to “BAL.” (Balance).
4. Press ON SCREEN CONTROL @ / # to adjust the balance.
5. When you finish, press EXIT repeatedly until the menu disappears from the
TV.
Listening at Low Volume (Loudness) (Also see page 23)
1. Press any button of ON SCREEN CONTROL
% / fi / @ / # once.
The MAIN MENU appears on the TV.
2. Press ON SCREEN CONTROL
% / fi to move
to “SOUND CONTROL,”
then press
@ / #.
The SOUND CONTROL menu appears on the TV.
3. Press ON SCREEN CONTROL
% / fi to move
to “LOUDNESS.”
4. Press ON SCREEN CONTROL @ / # to turn the loudness “ON” or “OFF.”
5. When you finish, press EXIT repeatedly until the menu disappears from the
TV.
Adjusting the DSP Modes (Also see pages 34, 36, and 39)
1. Press any button of ON SCREEN CONTROL % / fi / @ / # once.
The MAIN MENU appears on the TV.
2. Press ON SCREEN CONTROL
% / fi to move
to “MODE.”
3. Press ON SCREEN CONTROL
@ / # to select the DSP mode you want to
adjust.
4. Press ON SCREEN CONTROL % / fi to move to “SOUND CONTROL,”
then press
@ / #.
The SOUND CONTROL menu appears.
5. Press ON SCREEN CONTROL % / fi to move to “SURROUND LEVEL,”
then press
@ / #.
The SURROUND LEVEL menu appears.
Note:
If you select “HEADPHONE” in
step 3, the SURROUND LEVEL
menu will not appear.
MAIN MENU
SOUND CONTROL menu
SOUND CONTROL menu
SOUND CONTROL menu
Continued to the next page.
EN47_72.RX-774P[U]/1 98.3.10, 2:53 PM 48