beautypg.com

Receiving radio broadcasts, English – JVC RM-SR774XU User Manual

Page 30

background image

27

English

Receiving Radio Broadcasts

You can browse through all the stations or use the preset function to go immediately to a particular
station.

IMPORTANT:

When using the Remote Control, check to see if its remote control
mode selector is set to the correct position:
To operate this receiver, set it to “AUDIO/TV/VCR (except when
selecting the DBS tuner as the source).”

Setting the AM Tuner Interval Spacing

Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing.
When shipped, the spacing is set to 9 kHz.

On the front panel

only:

To select the 10 kHz interval:

Be sure the receiver is turned off, but is plugged into
an AC outlet and

POWER is pressed to set it in

the

_ON position. Hold down TUNER PRESET

and press STANDBY/ON

. “10K STEP” appears

on the display for about three seconds. Now the
10 kHz interval is selected.

To change back to the 9 kHz interval:

Be sure the receiver is turned off, but is plugged into
an AC outlet and

POWER is pressed to set it in

the

_ON position. Hold down FM MODE and press

STANDBY/ON

. “9K STEP” appears on the

display for about three seconds. Now the 9 kHz
interval is selected.

Tuning in Stations Manually

On the front panel:

1. Press FM/AM TUNING to select the band.

Each time you press the button, the band alternates
between FM and AM.

2. Turn MULTI JOG until you find the frequency you

want.
• Turning it clockwise increases the frequency.
• Turning it counterclockwise decreases the frequency.

From the remote control:

1. Press FM/AM to select the band.

Each time you press the button, the band alternates
between FM and AM.

2. Press TUNING DOWN or TUNING UP repeatedly

until you find the frequency you want.

AUDIO/TV
/VCR

CATV
/DBS

STANDBY

STANDBY/ON

and

TUNER PRESET

STANDBY

STANDBY/ON

and

FM MODE

FM/AM TUNING

Notes:

• When you turn MULTI JOG

quickly or hold TUNING
DOWN or TUNING UP in step
2, the frequency keeps
changing until a station is
tuned in.

• When a station of sufficient

signal strength is tuned in, the
TUNED indicator lights up on
the display.
When an FM stereo program
is received, the STEREO
indicator also lights up.

MULTI JOG

FM/AM

4

/ REW

TUN

ING

DOW

N

or

FF /

¢

TUNING

UP

EN20_46.RX-774P[U]/1

98.3.10, 2:51 PM

27

This manual is related to the following products: