Juniper Networks EX2200 - Manual (Page 67)

CHAPTER 7
Planning Power Requirements
• Power Specifications for EX2200 Switches on page 47
• AC Power Cord Specifications for EX2200 Switches on page 47
Power Specifications for EX2200 Switches
This topic describes the power supply electrical specifications for EX2200 switches.
Table 20 on page 47 provides the AC power supply electrical specifications for EX2200
switches.
Table 20: AC Power Supply Electrical Specifications for EX2200 Switches
Specification Item
100 through 240 VAC AC input voltage
50 Hz/60 Hz nominal AC input line frequency
• 7 A at 100 VAC and 2.9 A at 230 VAC (for switches with ports equipped for
PoE)
• 1.8 A at 100 VAC and 0.5 A at 230 VAC (for switches with no ports equipped
for PoE)
AC system current rating
Related
Documentation
AC Power Cord Specifications for EX2200 Switches on page 47 •
• Power Supply in EX2200 Switches on page 14
• General Safety Guidelines and Warnings for EX Series Switches on page 113
• General Electrical Safety Guidelines and Warnings for EX Series Switches on page 141
AC Power Cord Specifications for EX2200 Switches
Detachable AC power cords are supplied with the switch. The coupler is type C13 as
described by International Electrotechnical Commission (IEC) standard 60320. The plug
at the male end of the power cord fits into the power source outlet that is standard for
your geographical location.
47 Copyright © 2010, Juniper Networks, Inc.