Juniper Networks EX2200 - Manual (Page 28)

Table 3: CLI Equivalents of Terms Used in Documentation for EX2200 Switches
Additional
Information Item in
Documentation
Value (CLI) Description (CLI) Hardware Item (CLI)
“Chassis Physical
Specifications for
EX2200 Switches” on
page 5 Switch chassis – One of the following:
• EX2200-24T-4G
• EX2200-24P-4G
• EX2200-48T-4G
• EX2200-48P-4G
Chassis
Understanding
Interface Naming
Conventions on EX
Series Switches The switch does not
have actual FPCs. In
this case, FPC refers to
the switch itself. Value of n is always 0. Abbreviated name of
the Flexible PIC
Concentrator (FPC)
One of the following:
• EX2200-24T-4G
• EX2200-24P-4G
• EX2200-48T-4G
• EX2200-48P-4G
FPC (n)
Understanding
Interface Naming
Conventions on EX
Series Switches The switch does not
have actual PIC
devices; see entries for
PIC 0 through PIC 1 for
the equivalent item on
the switch. n is a value in the range
of 0-1. Abbreviated name of
the Physical Interface
Card (PIC) PIC (n)
“Front Panel of an
EX2200 Switch” on
page 5 Built-in network ports
on the front panel of
the switch PIC 0 One of the following:
• 24x 10/100/1000
Base-T
• 48x 10/100/1000
Base-T
“Front Panel of an
EX2200 Switch” on
page 5 Built-in uplink ports on
the front panel of the
switch PIC 1 4x GE SFP
“Optical Interface
Support in EX2200
Switches” on page 22 Optical transceivers n is a value equivalent
to the number of the
port in which the
transceiver is installed. Abbreviated name of
the transceiver Xcvr (n)
“Power Supply in
EX2200 Switches” on
page 14 AC power supply Value of n is always 0. Built-in power supply Power supply (n)
“Cooling System and
Airflow in an EX2200
Switch” on page 15 Fan tray – Fan tray Fan tray
Copyright © 2010, Juniper Networks, Inc. 8
Complete Hardware Guide for EX2200 Ethernet Switches