Set recorder’s input mode, Access main menu screen, Access vhs mode set screen – JVC SR-VS20U User Manual
Page 55: Select front aux input set mode, Access mode set screen, Select rear aux input set mode, Return to normal screen, Start player, Start recorder

EN
55
NOTE:
If you use an auxiliary input to connect a cable box or DBS
receiver, make sure that the correct AUX INPUT ("VIDEO" or
"S-VIDEO") is selected after you have finished editing
(
੬
steps 5 – 9).
0
4
1
3
DV
S-VHS
NUMBER "0"
SET RECORDER’S INPUT MODE
4
Set to "AUX". Press the NUMBER key “0” and/or CH to
select depending on the connector being used – "L-1"
for the rear panel input connectors, or "F-1" for the front
panel input connectors.
ACCESS MAIN MENU SCREEN
5
Press MENU.
● If you use the front S-VIDEO IN or VIDEO IN
connector, perform step 6 – 7, then go to step 10.
● If you use the rear S-VIDEO IN or VIDEO IN
connector, go to step 8.
ACCESS VHS MODE SET SCREEN
6
Move the highlight bar (arrow) to "VHS MODE SET" by
pressing
%fi, then press OK or
#
.
SELECT FRONT AUX INPUT SET
MODE
7
a– FRONT S-VIDEO IN :
Move the highlight bar
(arrow) to "FRONT
AUX INPUT" by
pressing
%fi, then
press OK or
# to set to
"S-VIDEO".
b– FRONT VIDEO IN:
Move the highlight bar
(arrow) to "FRONT AUX INPUT" by pressing
%fi,
then press OK or
# to set to "VIDEO".
MENU
OK
DV
DV
ACCESS MODE SET SCREEN
8
Press
%fi to move the highlight bar (arrow) to “MODE
SET”, then press OK or
#
SELECT REAR AUX INPUT SET
MODE
9
a– REAR S-VIDEO IN:
Move the highlight bar
(arrow) to "REAR AUX
INPUT" by pressing
%fi, then press OK or
# to set to "S-VIDEO".
b– REAR VIDEO IN: Move
the highlight bar
(arrow) to "REAR AUX
INPUT" by pressing
%fi, then press OK or # to set to
"VIDEO".
SELECT “EDIT” FOR PICTURE
CONTROL SET MODE
(VHS DECK ONLY)
10
Follow the “Picture Control” section on page 29, then
select “EDIT.”
NOTE:
When you select “EDIT” to dub tapes, be sure to select
“AUTO” or (“NORM” when “VIDEO CALIBRATION” is
set to “OFF”) after you finish dubbing the tapes.
RETURN TO NORMAL SCREEN
11
Press MENU.
START PLAYER
12
Set the camcorder to its play mode.
NOTE:
If the camcorder is equipped with a superimpose/OSD
disable feature then set its superimpose or display
feature to OFF before pressing play.
START RECORDER
13
Set your VCR to its record mode.
● If you are using a Master Edit Control-equipped JVC
camcorder, it can put the recorder automatically into
Record mode. (Refer to camcorder's instruction
manual.)
VHS MODE SET
S-VHS MODE
ON
VIDEO CALIBRATION
ON
PICTURE CONTROL
AUTO
= FRONT AUX INPUT
VIDEO
AUTO SP
=EP TIMER
OFF
BLUE BACK
ON
NEXT PAGE
SELECT WITH (
5,∞) AND (OK)
PRESS (MENU) TO END
MODE SET
=REAR AUX INPUT
VIDEO
OUTPUT1
AUTO
2ND AUDIO RECORD
OFF
AUTO TIMER
OFF
=
SUPERIMPOSE
ON
SELECT WITH (
5,∞) AND (OK)
PRESS (MENU) TO END
S-VHS
S-VHS