Access main menu screen, Access vhs mode set screen, Select s-vhs mode – JVC SR-VS20U User Manual
Page 38: Return to normal screen, Playback and recording features (cont.), S-vhs (super vhs), s-vhs et and vhs, Vhs deck only)

38
EN
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS VHS MODE SET
SCREEN
2
Move the highlight bar (arrow) to "VHS MODE SET" by
pressing
%fi, then press OK or
#
.
SELECT S-VHS MODE
3
Move the highlight bar
(arrow) to "S-VHS MODE"
by pressing
%fi, then press
OK or
#
to set to "ON" or
"OFF".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTE:
When playing back a tape that has been recorded in S-VHS or
S-VHS ET, the S-VHS indicator lights on the display panel
regardless of the "S-VHS MODE" setting.
S-VHS (Super VHS), S-VHS
ET and VHS
(VHS deck only)
Your VCR can record in S-VHS, S-VHS ET or VHS.
S-VHS allows you to make high quality video recordings with a
horizontal resolution of 400 lines. This compares with the 240
lines of resolution of normal VHS recordings. To achieve the
highest quality picture we recommend that you record in S-VHS
mode.
By using S-VHS ET it is possible to record and play back with S-
VHS picture quality on VHS cassettes with this VCR. For details,
refer to page 39.
To record in S-VHS;
● perform the steps 1 – 4 in the right column to set the "S-VHS
MODE" to "ON".
● then, insert a cassette marked "S-VHS", the S-VHS indicator
will light on the display panel.
The S-VHS recording mode will be automatically selected.
To record in S-VHS ET on a VHS high grade cassette;
● press S-VHS ET and set to "ON".
੬
"Super VHS ET" on page 39.
To record in VHS;
● insert a cassette marked "VHS".
● press S-VHS ET on the VCR. You can check the current setting
("S-VHS ET : ON" or "S-VHS ET : OFF") if "SUPERIMPOSE" is
set to "ON" (
੬
pg. 27). If "S-VHS ET : ON" appears on the TV
screen, press S-VHS ET again in about 5 seconds to set it to
"OFF".
The VHS recording mode will be automatically selected
regardless of the S-VHS mode setting.
To record in VHS on an S-VHS cassette;
● insert the cassette marked "S-VHS", the S-VHS indicator will
light on the display panel.
● then, perform the steps 1 – 4 in the right column to set the
"S-VHS MODE" to "OFF"; the S-VHS indicator will go out.
The VHS recording mode will be selected.
NOTE:
Tapes recorded in S-VHS or S-VHS ET mode can not be played
back successfully on normal VHS VCRs.
PLAYBACK AND RECORDING FEATURES (cont.)
VHS MODE SET
=S-VHS MODE
ON
VIDEO CALIBRATION
ON
PICTURE CONTROL
AUTO
FRONT AUX INPUT
VIDEO
AUTO SP
=EP TIMER
OFF
BLUE BACK
ON
NEXT PAGE
SELECT WITH (
5,∞) AND (OK)
PRESS (MENU) TO END
1
3
DV
S-VHS
MENU
OK
S-VHS ET